扑克王app下载二维码

Current location: Home > Product series > Bearing bush temperature sensor
Product series
Bearing bush temperature sensor
S series temperature sensor--sheathed wire protection

Sheathed wire protection integrated temperature sensor S08Pt100-200-X-3113/C01K600
——————————————————————————————————————————————————————
It is applied in monitoring thrust pad and oil temperature of water turbine. In response to the oil flow impact under complex conditions, the sheathed wire conductor protection device can prevent the hard damage caused by mechanical vibration.
 
 
Applications of sheathed wire protection integrated temperature sensor
——————————————————————————————————————————————————————
It is applied in monitoring of thrust pad, guide bearing and oil temperature of water turbine generator set.
 
 
Functional characteristics of sheathed wire protection integrated temperature sensor
——————————————————————————————————————————————————————
The chip-type temperature sensing element adopts laser welding technology to prevent the solder joints from loosening or falling off in case of strong vibration, which effectively improves the stability of measurement.
Movable thread connection mode is available. The conductor does not rotate with the probe during installation.
The protective device of sheathed wire conductor can effectively bear the load of the joints of rigid material and flexible material and prevent the conductor from breaking when the tail conductor swings frequently
Oil and high temperature resistant shielded conductor, jacket and insulating layer are made of special polymers, which can work in the oil temperature of 100 ℃ for five years. 
The copper-plated silver core has good conductivity, and the equilibrium degree of each hundred meters is less than 0.05Ω.
 
 
Main technical parameters of sheathed wire protection integrated temperature sensor
——————————————————————————————————————————————————————
Model Parameters
S08Pt100-200-X-3113/C01K600 Testeck sheathed wire integrated thermistor 
Temperature measuring range -50~200℃
Temperature sensing element PT100 class a accuracy
Wire system Three wire system
Process connection Movable ferrule thread M16×2 or other sizes
Casing pipe 304 stainless steel
Outer diameter of casing pipe Φ8、Φ10、Φ12
Protective device Sheathed wire protection
Insulation resistance at room temperature >100MΩ
response time τ0.5<15s
Conductor specification TST319020
Outer diameter of sheathed wire Φ4
 
 
Recommended parameters of sheathed wire thermistor
——————————————————————————————————————————————————————
Model S08Pt100-200-X-3113/C01K600 S12Pt100-200-X-3113/F01K600
  Recommended parameters for Testeck sheathed wire thermistor
Insertion depth 200mm 200mm
Process connection Movable ferrule thread M16 × 2 Movable ferrule thread G1 / 2“
Length of thread 14mm 18mm
Length of corrugated pipe 600mm 600mm
Connection form Aciform Aciform
Number of pairs Single piece Single piece
Application site Temperature of thrust bearing pad and oil Temperature of thrust bearing pad and oil