扑克王app下载二维码

Current location: Home > Product series > Temperature sensor of generator
Product series
Temperature sensor of generator
Temperature measurement of stator winding

Description
——————————————————————————————————————————————————————
It is embedded in the part of winding that cannot be touched after the motor is made, and it cannot be replaced easily. Long term stability and longevity are particularly critical.
Element: Wire winding elements ensure a small rise of self-heating temperature. There are two types of single and double elements. The width and thickness of double-element platinum resistor are larger than that of single-element platinum resistor.
Insulation shell: Class F and Class H insulation materials can be provided.
Lead wire: Use high-temperature resistant and corrosion-resistant fluoroplastic insulated and sheathed control cables.
 
 
Customization features
——————————————————————————————————————————————————————
The high-temperature heat-shrinking film package is placed outside the insulation shell of platinum resistor, which improves the insulation performance of the platinum resistor and protects the probe root to avoid wire breakage.
To facilitate installation, the outgoing direction of platinum resistor can be customized. It can be either the top outgoing line or the side outgoing line.
The lead wire of platinum resistor can be round wire, flat wire and loose wire.
The wire system is generally three-wire system, and it can be made into two-wire system and four-wire system according to the needs of users.

 
Technical requirements
——————————————————————————————————————————————————————
Graduation: Pt100
Temperature range: -40℃~180℃, tolerance Class B
Wire system: Three-wire system, single piece /double pieces
Insulation resistance: The insulation resistance value at room temperature shall not be less than 100MΩ, and it shall be greater than 20MΩ at 180℃.
Withstand voltage: Apply 50Hz and 1,500V to platinum resistor (including lead wire) for 1min. It is intact.
Pressure resistance: Apply 2MPa for 60s to platinum resistor without deformation, short circuit and open circuit, and the resistance value meets the requirements.
Longitudinal tension of lead wire: The tension that lead wire and sensing body can bear along the longitudinal direction is 50N, and the time is 15s.
Airtightness: The lead wire of the platinum resistor is reliably sealed with the sensor body.
Thermal cycle: Under the influence of thermal cycle, the change value of platinum resistor at 0℃ shall not exceed 0.12Ω.
Self-heating effect: The increment of platinum resistor affected by self-heating is <0.1Ω.